The new line of Legend regulators crafts the future with innovative technology and sleek cosmetic appeal. The new Legends are smaller and lighter making for a more comfortable dive. Regulator Specifications: Overbalanced Mechanism Environmental Dry Chamber Aqua Flex Hoses Work of Breathing “Peach Skin” Varnish The ACD System

The XTX Tungsten is built upon the XTX200 platform but with a truly unique, added feature: it is protected with a hard, durable PVD (Physical Vapor Deposition) finish. This “tough as nails” finish is better than traditional chrome plating. The coating is made of high quality grades of Titanium, Zirconium and Chromium. The result is […]

The XTX200 model is the flagship of the Apeks® fleet of fine regulators. It uses the proven “FSR” type first stage as found on the ATX200. This XTX200 first stage features a new bright chrome finish. The second stage, although shipped in a standard right-hand configuration, can be reversed into a left-hand configuration by your […]

The Aqua Lung Calypso Titan Regulator Octopus comes with a huge number of great features. Features A mid-sized, feature-rich alternate air source Diver-controlled Vane Adjustment Switch (VAS) reduces sensitivity to free flow on the surface and provides maximum airflow at depth Enlarged second stage air inlet equipped with Aqua Lungs exclusive “Comfo-Bite” mouthpiece Equipped with […]

The Apeks AT20 Stage 3 Regulator with Octopus is now supplied with the US4 1st stage. The AT20/US4 regulator has been designed for warm water diving. Just because it is warm water equipment does not mean it is of low quality. The Apeks AT20/US4 is a very good breathing regulator featuring our venturi control and […]

The Apeks Stage 4 Flight pewter includes a number of great features, including the pewter Flight regulator, Flight Octopus, and pewter double gauge. The Flight regulator was released in 2009 and is the lightest regulator in the world designed for travelling divers in waters down to 10 degrees. The double gauge includes a combined contents […]

The Apeks Tek3 Set has a variety of useful configurations. Utilizing dedicated right hand and left hand first stages, a diver can configure the Tek 3 regulators so that both external diaphragms face toward center and all hoses are able to route downward. This not only allows a more streamlined configuration, it is safer as […]

The Apeks XTX20 Regulator plus Octopus is a useful and advanced piece of gear. The XTX20 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a […]

Get the Apexs XTX50 plus XTX20 Regulator and Octopus. The XTX50 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both […]

This Apeks Pressure Gauge Console Depth Combo is a quality piece of gear. Our 2 Gauge console combines a pressure (contents) gauge and a depth gauge housed in a specially designed case. The unit is completed with a high pressure hose. The console clearly displays your pressure and depth readings for easy viewing under water […]

This Apeks Pressure Gauge Complete, with an internal Bourdon pressure measuring mechanism, gives extremely clear readings on your cylinder. The gauge indicates the cylinder bottle pressure and the dial range is from zero to 360 bar (an imperial version is also available with a range up to 5000 PSI). The dial face is designed with […]

This Termo Gauge Combo 2k comes complete with a 75cm hose, 70M analogue depth gauge Combo. SPG Face measures 5cm diameter.

The Apeks AT20 Regulator Octopus is a small and lighter version the its T20 predecessor. This results in less jaw fatigue and less drag. This pneumatically balanced octopus is ideally suited for an over-balanced Apeks first stage. The diver has full control of the venturi by means of a lever so as to prevent accidental […]

The Apeks XTX20 Octopus features a pneumatically balanced valve system. It includes left / right reversibility and the performance you would expect from an Apeks pneumatically balanced valve. Pneumatically Balanced 2nd StageAll Apeks second stages feature a Pneumatically Balanced Valve System. In most second stage designs, the inhalation effort of the diver opens a valve […]

The Aqua Lung Calypso Titan Octopus is a great match for the Aqua Lung Calypso or Titan regulators. This octopus is a cold water rated balanced second stage that provides a high and reliable flow rate when its needed most. The octopus is supplied with a 100cm yellow hose with tool less hose to second […]

This Termo SPG 2k with Hose is made of special thermoplastic that is designed to fit it perfectly with your hand. With extremely small dimensions and a very light weight, it’s a great piece of gear. Done to avoid excessive demands on the hose and connects to the first stage regulator. The gauge is a […]

The new Apeks Pressure Gauge Console Depth Combo Compass is a popular, stylish piece of equipment. Every detail has been carefully considered to offer divers a comfortable, compact and functional information system. All instruments give accurate, clear readings and are made from the best quality build materials. As such they offer perfect functionality and excellent […]

Related Posts Plugin for WordPress, Blogger...